in CANADA:
13-60 Meg Dr., London, Ontario, Canada N6E 3T6
in the USA:
474-43560 Pinegrove Ave., Port Huron, Michigan 48060

Canada & USA TOLL FREE 800.279.9912
Tel: 519.686.2715
Fax: 519.686.8159
E-mail: hcs@hcs77.com
 
SEARCH OUR ONLINE CATALOG!


 
Product Categories
Main Web Site

Immersion Heaters

cartridge heaterCartridge Heater from Heaters Controls & Sensors
Cartridge Heaters are available in various sizes from 1/8 inch to 1-1/4 inch in diameter to lengths that are only restricted by the diameter of the heater. Various lead styles are available to withstand constant flexing, washdown or extremely corrosive and moist environments. They can also be manufactured to prevent failure in vacuum or cryogenic applications.
 
flanged immersion heatersFlanged Immersion Heaters from Heaters Controls & Sensors
Flanged Immersion Heaters are used in large capacity vessels, for high temperature and pressure applications. They are installed by bolting the unit to a matching flange welded to the vessel. Watt densities from 90 Watts/sq inch, Explosion Proof (NEMA 7), Corrosion Resistant (NEMA 4X), General Purpose and Standoff Terminal housings are available. A number of sheath materials like Titanium, Incoloy, Stainless Steel, Steel, and Copper can be used as required for specific applications. Standard Flanged Immersion Heaters have a 150 lb flanges but 300 lb flanges are also available. To guarantee sheath material and watt density compatibility with material or process being heated consult HCS.
 
over the side immersion heatersOver The Side Immersion Heaters from Heaters Controls & Sensors
Over The Side Immersion Heaters tubular elements are designed for installation from the top of tanks where through-the-wall heaters cannot be installed. They are available in many configurations, with partially unheated sections, thermostats, washdown, or corrosion resistant enclosures. Over The Side Immersion Heaters can be manufactured with different sheath materials like 316 SS, Titanium, Copper, Steel, Incoloy, Teflon Coated, or Ouartz for acids, and can be made in various shapes and sizes. They are normally designed for particular applications, however certain sizes are also available from stock.
 
circulation heatersCirculation Heaters from Heaters Controls & Sensors
Circulation Heaters are Flanged or Screwplug heaters that are mounted in a pressurized vessel, and are a complete unit for heating flowing gases or liquids. They are compact and highly efficient heaters are ideal for side arm or inline applications in either natural circulation or forced/pumped systems. The wide variety of options make Circulation Heaters suitable for most applications like Heating Fuel oil, Air, Steam Superheating, Corrosive gases & liquids, Water and or delicate liquids like brewers grain for Beer.
 
Screw Plug Immersion Heaters from Heaters Controls & Sensors
screw plug immersion heaters Screw Plug Immersion Heaters are ideal for immersion min liquids, where space and connections are a problem. They are installed in medium to small size containers at pressures up to 3000 PSI. Watt densities from 90 Watts/sq. inch, Explosion Proof (NEMA 7), Corrosion Resistant (NEMA 4X), and General Purpose Terminal housings are available. A number of sheath materials like Titanium, Incoloy, Stainless Steel, Steel, and Copper can be used as required for specific applications. To guarantee sheath material and watt density compatibility with material or process being heated consult HCS.
 
 
  Home || About Us || New Products || Service || Contact Us || Site Map
© 2005 HCS, all rights reserved || Site by Panther Marketing & Design.